The lightweight and comfortable headset microphone allows for absolute freedom of movement for a more animated and impressive performance. High quality condenser technology provides clear, brilliant sound. All rack-mountable G3 300 series receivers are equipped with an Ethernet port. This port means you can monitor and remotely control the system from a PC with Sennheiser’s “Wireless Systems Manager” software.
| RF frequency range | 516 - 865 MHz |
|
Transmission/receiving frequencies | 1680 |
|
Presets | 24 |
|
Switching bandwidth | 42 MHz |
|
Peak deviation | +/- 48 kHz |
|
Compander | HDX |
|
Frequency response (microphone) | 80 - 18000 Hz |
|
Signal-to-noise ratio | > 115 dB(A) |
|
THD, total harmonic distortion | < 0,9 % |
|
In compliance with | ETS 300422 , ETS 300445 , CE , FCC |
|
Antenna connector | 2 BNC, 50 Ohm |
|
Audio-XLR connector | 6,3 mm |
|
Audio output level (balanced) | XLR, +18 dBu max |
|
Audio output level (unbalanced) | Jack, +12 dBu max |
|
Dimensions (Receiver) | 212 x 202 x 43 mm |
|
Weight (Receiver) | 980 g |
|
RF output power | 10/30 mW |
|
Operating time (transmitter) | > 8 h |
|
Input voltage range | 1,8 Vline |
|
Input voltage range | 2,4 Vline |
|
Dimensions (Transmitter) | 82 x 64 x 24 mm |
|
Weight (Transmitter) | ~ 160 g |
|
Transducer; Microphone type | elektret |
|
AF sensitivity | 1,6 mV/Pa |
|
Sound pressure level (SPL) | 150 dB(SPL) max. |
|
Pick-up pattern | super-cardioid |
