Home » Wireless Microphones » Wireless pro 3000/5000 Series Microphones
HS2_web.jpg

Scope of Supply
Short cap: MZC 2-1 (Cat. No. 76612)
Long cap: MZC 2-2 (Cat. No. 74645)

Download

HS2_ProductSheet_EN.pdf
HS2_InstructionsForUse_EN.pdf

Maintaining your Sennheiser Headphones
  
HS 2 Headset microphone 5336
Find a dealer

Description

The HS 2 is an omni-directional headset microphone using an MKE 2 Gold capsule and fitted with a steel wire cable and a special 3-pin connector for Sennheiser 3000 and 5000 Series bodypack transmitters. The small capsule and gooseneck assembly can be optimally positioned for both vocal and speech applications.

Variant :

HS 2-1 (005337) - HS 2 with Lemo 3-pin connector, beige

HS 2 SL-5 (500218) - HS 2 without connector, black

HS 2 HL-5 (500219) - HS 2 without connector, beige

HS 2 SL-7 (SER010) - HS 2 with e-connector, black

HS 2 HL-7 (SER011) - HS 2 with e-connector, beige



Features

    Technical Data

    Pick-up pattern omni-directional
    Frequency response (microphone) 20 - 20000 Hz
    Sensitivity in free field, no load (1kHz) 5 mV/Pa
    Nominal impedance 1000 Ohm
    Min. terminating impedance 4700 Ohm
    Equivalent noise level 26 dB(A)
    Equivalent noise level weighted as per CCIR 468-3 39 dB
    Maximum sound pressure level (passiv) 142 dB
    Connector 3-pin for SK 50, SK 250 and SK 5013
    Colour anthrazit
    Cable length 1,6 m
    Diameter 4,8 mm;
    Weight incl. cable 34,4 g
    About Us | Service & Support | Contact Us | Employment | Marketing | Press
    PRODUCTS Headphones & headsets : Wireless microphones : Microphones : Conference systems : Guided tour & audio guide : Communication : Audiology : Aviation
    OTHER BRANDS Neumann : Innovason: Kling & Freitag : Klein Hummel : Yellowtec : K-Array
    Thanks!

    You are now register to Sennheiser Canada's mailing list.
    Oups!

    You did not enter your « name ».
    Oups!

    You did not enter your « e-mail address ».
    Oups!

    You did not enter a « valid e-mail address ».