Home » Aviation » Helicopter
HMDC372_zoom.jpg

Scope of Supply
1 HMDC 372 NoiseGard™
1 x 3-pin input socket for aircraft’s internal power supply
1 carrying case for headset and accessories
1 MZQ 2002-1 cable clip


Download


Maintaining your Sennheiser Headphones
 
HMDC 372 NoiseGard pilot headset-General Aviation 500568
Find a dealer

Description

The HMDC 372 is a pilot’s headset with closed ear protector headphones and NoiseGard™ active noise compensation for use in helicopters.

Features

  • Constant attenuation of up to 40 dB throughout the entire audio range
  • Superior speech intelligibility
  • Electronics fully integrated into headphone capsules
  • Can be used as conventional headphones when supply voltage is switched off
  • Noise-compensated, low-resistance M-87/AIC dynamic boom microphone for superior speech transmission
  • 5 year warranty
Technical Data

Transducer principle (Headphones) dynamic
Ear coupling circumaural
Nominal impedance (active/passive) 50/35 Ohm-mono
Attenuation (active + passive) > 25 - 40 dB
Contact pressure ca. 10 N
Weight w/o cable 370 g
Transducer principle (Microphone) dynamic - M-87/AIC
Output voltage 1.8 - 4 uV/74 dB at 5 Ohm
Operating temperature -10 °C...+55 °C
Storage temperature -55 °C...+55 °C
NoiseGard-Supply 12 - 35 VDC, ca. 27 mA, max. 80 mA
Specials NoiseGard on/off switch
Connection cable coiled
Connector U-174/U headphones & microphone, XLR-3 NoiseGard power, volume control for headphones
Frequency response (headphones) 45.....15000 Hz
Frequency response (microphone) 500.....4000 Hz

PRODUCTS Headphones & headsets : Wireless microphones : Microphones : Conference systems : Guided tour & audio guide : Communication : Audiology : Aviation
OTHER BRANDS Neumann : Innovason: Kling & Freitag : Klein Hummel : Yellowtec : K-Array
Thanks!

You are now register to Sennheiser Canada's mailing list.

Oups!

You did not enter your « name ».

Oups!

You did not enter your « e-mail address ».

Oups!

You did not enter a « valid e-mail address ».